Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
Joined
·
106 Posts
Kick gears in a sammy

You can probably find a company that builds zuki stuff in England that can or does build a "hybrid" rear housing that uses the sammy axle tubes with the kick rear axle center. The kick has a larger rear diff. If noone there can make one, go through Trailtough and buy one from him. The front you can use untouched in the sammy front end without a locker. If you want to run a locker, you have to have the kick ring and pinion gears setup in the sammy dropout, but you need a spacer and retainer kit for the crosspins in the sammy diff. You can get that through Spidertrax, they are pretty inexpensive.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top