Pirate 4x4 banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,138 Posts
Discussion Starter #1
ok just wondering has anyone done this before?

i havn't meausured a single cab yet but i want to put an 83-88 single cab body on my 85 runner frame

i would believe the mounts should line up?

any one have any experience :confused:
 

·
Registered
Joined
·
13,348 Posts
Ask BoogerWeldz, he's done it.
 

·
Registered
Joined
·
1,048 Posts
have not done this swap but i think there are posts on some who have. anyway, if the body mounts need to be moved just cut them off and stick them in the right location-no big deal. don't ruin the mounts when you cut them off.
 

·
Super Moderator
'82 Scrambler, '14 Rzr
Joined
·
62,007 Posts
Toddy (or maybe ToyToddy) on the board here has done it - bought an 85 frame from me, and put an 82 cab and front clip he got from me also on it...

I will try to direct him to check this thread out and report...


http://www.4x4spot.com/project_4trucker.htm





 

·
Registered
Joined
·
45 Posts
mounting

the first 2 sets of mounts are the same, the third set is spaced to far back. Hack it off and weld it in the right place.I did the the reverse. took truck frame and mounted 4runner cab.
 
1 - 6 of 6 Posts
Top