Pirate 4x4 banner

Sitting On All Fours(!)

15034 Views 71 Replies 20 Participants Last post by  Greg Davis
Finally got the front coilovers mounted on Friday. It is a little tall in front, but I have the adjusters threaded down so the coils won't unseat at full droop. I have 6" tender coils and sliders coming so I will be able to drop the front down 3" - 4" to make it sit level.

I still have to fab the cross-bar between the hoops and mount the rad resevoir, the steering fluid resevoir, and a few other bits under the hood that had to be moved to make room for the hoops.

Plus, I'll have to make some cuts in the hood for the hoops to poke through. But hey, everytime I remove sheet-metal, it gets a little lighter!:grinpimp:

See less See more
1 - 1 of 72 Posts
Bad ass D2 :smokin:
1 - 1 of 72 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.