Pirate 4x4 banner
1 - 7 of 7 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter · #1 ·
Where could a spare DS be stored on a rig (besides inside)and how (custom brackets, bungee cords,tie-wraps(LOL),etc..???)
<IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/rolleyes.gif" border="0">

Pictures or links would be helpful ...
 

·
Registered
Joined
·
1,024 Posts
Front or rear? crawl under your rig and check it out. There are some places along your frame that could be used for storage. Maybe acroos your frame in the rear (length?) Measure twice cut once <IMG SRC="smilies/rolleyes.gif" border="0">
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #3 ·
Originally posted by bertha:
<STRONG>Front or rear? crawl under your rig and check it out. There are some places along your frame that could be used for storage. Maybe acroos your frame in the rear (length?) Measure twice cut once <IMG SRC="smilies/rolleyes.gif" border="0"></STRONG>
***************************************************************************************************************************************
Did I forget to mention the rear shaft??? Dammm, looks like I did ... <IMG SRC="smilies/rolleyes.gif" border="0">

Anybody got some pix of some DS stored under the bed???
 

·
Registered
Joined
·
52 Posts
Discussion Starter · #5 ·
Originally posted by marco:
<STRONG>PVC pipe capped at both ends. Put it anywhere.</STRONG>
***************************************************************************************************************************************
That's a good idea, I would have never of thought about using PVC pipping.
<IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/bounce.gif" border="0">
Have you done this to your rig??? If so, got pics???

Thanks ...
 

·
Registered
Joined
·
387 Posts
<FONT COLOR="Red"> I've seen a rear driveshaft stowed nicely up above the operational one... I don't want to do this with mine as it will compromise the area that I have planned to install a spare fuel tank.

I've crawled all around under my rig (bobbed longbed) looking for a better place but the space just dosen't seem to be there (unless you where to build a "super-colapsable" square shaft for a spare instead of the stocker).
</FONT c>
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top