Pirate 4x4 banner
1 - 9 of 9 Posts

· Premium Member
Joined
·
1,612 Posts
Discussion Starter · #1 ·
Well guys, I could really use some help, I am wanting to keep the power rear window on my Sport Trac functional but I need some help with the wiring. I am planning on using DPDT switches for the door windows, they are just two wire reversing motors. Simple. But the rear window motor has 8 wires going to it. For the life of me I can't figure out why it needs 8 wires, but if any body has access to a wiring schematic and can tell me what all those wires are for it would help me out immensly. The wire collors are:
yellow w/ green stripe
black w/ pink stripe
tan w/black stripe
purple w/ lt. blue stripe
purple w/ lt. green stripe
yellow w/ red stripe
black w/ white stripe
black
Thanks in advance for any help.
 

· Premium Member
Joined
·
2,788 Posts
I lloked at the Ford wiring diagrams and tried to copy but the Ford website won't let me do that:mad3: Anyhow Sport Tracs also have a vent feature that's why there's the extra wiring and a module attached to the motor at the slider.
 

· Premium Member
Joined
·
1,612 Posts
Discussion Starter · #7 ·
Thanks for all the help guys. I learned about the vent feature and all the extra bullshit, so I removed the motor assembly, dissambled it, and replaced the motor housing with a spare door window motor housing. So now it's just a two wire set up.
 

Attachments

1 - 9 of 9 Posts
Top