Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,846 Posts
I made my own cross-over steering for $20. If you have a die grinder, good drill press, and the welding know how it isn't hard. That being said, mine is trustworthy at 1 mph off-road, but welded steering components are not recommendable for street use no matter who does them. In many places they are actually illegal. A drop pitman arm will work for now as will a z-link. However, think ahead about where you want to go with your rig. In the long run, a quality z-link or cross-over steering will be better platforms to support your future upgrades. Only problem is they cost some serious money. <IMG SRC="smilies/crybaby2.gif" border="0">
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top