t-case gears, F or R case ?
1 - 5 of 5 Posts
Joined
·
12,996 Posts
Putting them in the rear case is what is usually recommended by Marlin, [email protected], etc. That way the rear case only sees the 2.28:1 reduction in front of it (plus the tranny, derrr) instead of the 4.7 gearset.
Joined
·
11,323 Posts
putting them in teh front case just makes more torque going into the second input shaft, which at least an 8yr old shaft, possibly up to 23yrs old
with all this said, i run my 4:1 in the front case... but that's for an entirely different reason... and i don't run a toy rear case
with all this said, i run my 4:1 in the front case... but that's for an entirely different reason... and i don't run a toy rear case
Joined
·
6,969 Posts
Run the lower gears in the rear case. If you planning to put low gears also in the front case, you should upgrade to 23 spline.
1 - 5 of 5 Posts
