Pirate 4x4 banner

1 - 9 of 9 Posts

·
Registered
Joined
·
2,053 Posts
Discussion Starter · #1 ·
i was reading the post about nwor and wonted to let evry one know what service realy is.i sent my d/shafts to jess at high angle to be extended and the 89 c/v clerenced i told him i needed the t/case flang to match the 86 shaft i had a trail ride planed for saturday and realy wonted to test my duel t/case. i receved the shafts on thurseday when i got home from work and there was no flang.i called him and left a mesage that night that it was left out and i would go to a wrecker yard and get one and that there was no problum.the next morning i got a call on my cell, he was not happy with his misstake said he would call me right back called me back in 10 minutes he had a dilivery driver in bakersfuild and she would go to fresno to marlins and pic one up for me and have it delivered to me in citrus heights.he did all that was posable to corect the misshap and marlin sent a clean flang at that.i did not expect that at all.now that is real customer service and thanks to the dilivery laidy i hope you had a good trail ride.THANKS JESS <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0">

[ 09-10-2001: Message edited by: toy 4 rox ]
 

·
Does yer dewg bite?
Joined
·
5,664 Posts
Wounldn't expect anything less <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
2,079 Posts
Just another testimony to why JESSE ROCKS!!!!! <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/smokin.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> HE'S THE MAN
 

·
Registered
Joined
·
27,885 Posts
another testimony:

i sent my shafts to high angle with measurements and they arrived prompty all modded(cv joints, long spline,etc) via ups. i measured the front on brand new springs which settled in more that 2 inches(all-pro) my driveshaft ended up too long, but jesse cut it down and even shipped it back for free. none of you will be anything but pleased doing bussiness with this guy, i promise you. if you are ready for driveshaft work there is no reason to look anywhere else---high angle driveline

(530)877-2875 <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
12,238 Posts
thanks guys i try to treat you all how i'd like to be treated- what comes around goes around -good-and bad- Jess
 

·
Registered
Joined
·
481 Posts
jess is the man. <IMG SRC="smilies/biggrin.gif" border="0">

jess...i haven't forgot about sending you my old flanges. <IMG SRC="smilies/wink.gif" border="0">

happy trails
rich *ruger*
 

·
Registered
Joined
·
399 Posts
Jess is building my front DS right now. Can't wait to get it (maybe by next friday <IMG SRC="smilies/question.gif" border="0"> ) so I can go wheelin next weekend!
 

·
Registered
Joined
·
175 Posts
I have known Jess for a long tome now. He has never done anyone down, and will always give you the best service he can. Once you have dealt with Jess and seen the very high standards of work he delivers, you will never go anywhere else for your drivelines.
 

·
Registered
Joined
·
27 Posts
Best quality drivelines and customer service you can get anywhere.
 
1 - 9 of 9 Posts
Top