Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I changed my intake(from a TBI, to an edelbrock performer). I am buying an edelbrock 600 cfm,I need to know what bracket to use for my throttle,kickdown,and cruise cables.It is on an 88 GMC truck. Has anyone done this before,to tell me how <IMG SRC="smilies/frown.gif" border="0">
 

·
Registered
Joined
·
1,857 Posts
one from any GM car with an automatic and four barrel should work.
 

·
Registered
Joined
·
373 Posts
For the Edelbrock you'll need the bracket from a Carter AFB carb , the rear flange pattern is not as far apart as the Rochester.
 
1 - 3 of 3 Posts
Top