Pirate 4x4 banner
1 - 1 of 1 Posts

· Registered
37 Posts
If I understand you correctly, then you have the hinge and latch mounted on the bumper, witch is mounted on the chassis.
Your anchor point is mounted on the quarterpanel witch is mounted flexible from the chassis.

If that is correct, then in a very short time, you will starting to see stress cracks in the quarter panel, unless you mount your anchor point flexible.

Hope this helps,

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.