Pirate 4x4 banner

1 - 7 of 7 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
I got the Kilbyiezed mopar autotranny deep oilpan for my TJ. Opened the box and there are no instructions. Still, it ought to be a no-brainer. I have a spacer for the oil pump intake, a new filter, the pan, and gaskets. The FSM would come in real handy about now. Anyone else done this yet? Anything I should watch out for?
 

·
Registered
Joined
·
10,490 Posts
Make sure you don't fawk up all of the steel pony mods <IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0"> newbie <IMG SRC="smilies/thefinger.gif" border="0"> welcome <IMG SRC="smilies/thefinger.gif" border="0">
 

·
Registered
Joined
·
32 Posts
You'll have to drop your x-fer case skid to install it.

And check and re-check your fluid level several times (after driving) after re-filling it.
 

·
Registered
Joined
·
26 Posts
Discussion Starter · #5 ·
I got better tech info on JU! <IMG SRC="smilies/thefinger.gif" border="0">

Seriously though, thanks for the info, for those that feed the newbies that is. For those that don't, that is so <IMG SRC="smilies/rainbow.gif" border="0"> . <IMG SRC="smilies/thefinger.gif" border="0">
 

·
Registered
Joined
·
557 Posts
Dont let the door hit you in the glutiusmaximus on the way out ! <IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/rolleyes.gif" border="0">

<IMG SRC="smilies/jeep2.gif" border="0"> __(OIIIIIO)__rOkOn <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
26 Posts
Discussion Starter · #7 ·
<IMG SRC="smilies/confused.gif" border="0"> Leave? I'm just not that thin-skinned.
 
1 - 7 of 7 Posts
Top