Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
254 Posts
Discussion Starter · #1 ·
I have an 01 tj. with 4.0 and nv3550.

when i press the clutch and hold it all the way in sometimes it takes a second for the pedal to come back off the floor.

It aslo happens when im parking and have to half clutch it a little bit.

then today i was getting on the free way and went to downshift because of traffic and the clutch did not comback at all it stayed on the floor.

i had to stop shut it off and drive home shifting with out the clutch

could this be I need a new clutch slave? clutch? pressure plate?

I checked to clutch fluid last week when the jeep was off.

couldnt find anything from searching.
thanks
 

·
Registered
Joined
·
254 Posts
Discussion Starter · #3 ·
Thanks, Is there a way that I can check it to be sure?
 

·
Registered
Joined
·
254 Posts
Discussion Starter · #5 ·
I bought a slave and master cylinder. just debating on which one i should try first. the slave was about 60 and the master cylinder 90. probably gonna install the slave first and see if that works
 
1 - 4 of 4 Posts
Top