Pirate 4x4 banner
1 - 8 of 8 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
I have done a search, but are there any 9's or 60's out there that do not need to be narrowed. I have a TJ and would like to use this winter to set-up the rear. I have the RE 5.5 " long arm kit and would be running 36's. Would I have enough clearance with a 60? I know about the 8.8 being the right width. Is there anything else?


Chris
 

·
Registered
Joined
·
986 Posts
The Dana44 from a Wagoneer will work, as long as it's not offset. Also, the Scout is bolt-up as well, besides spring mounting.

-J
 

·
Registered
Joined
·
188 Posts
i got a 9 inch out of a ranchero for my XJ same width exactly.and the spring perches happened to fit with only re-drilling the holes in the center about 1/2 inch.I assume a TJ is the same width as a cherokee. <IMG SRC="smilies/beer.gif" border="0">
 

·
Registered
Joined
·
3,242 Posts
the EB rear is usually around 59", the TJ is 61.5"...

you will need rear spacers if you want to keep your f&r axles the same width.
 
1 - 8 of 8 Posts
Top