Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
31,463 Posts
lemme see.. I've stripped it down to a simple 1/2" socket set and a set of combination wrenches, a hub socket, couple snap ring pliers, BFH, pickle fork, couple crescent wrenches, flat and curved vise grips and occasionally an impact. Then again, I built my rig from the frame up, so I know each and every bolt thats on it.. and for the most part only carry that range
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top