Pirate 4x4 banner
1 - 2 of 2 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I was just tightening the bolts which keep the clutch cover on the flywheel, haynes manual gives 14 lbs or 1.9 kg/m which seems so little to me, I,ve tightened them all to 20 lbs as this is the lowest my torque wrench goes, can I do something wrong with this ?

I've just learned this great trick to remove the pilot bearing, but may be you guys know this already, I was quite enthusiast over it. It made my day. You stuff the hole full of this kneadable childrens clay like thing, we call it plasticine and then you put an old shaft or a bolt through the hole and you drive more and more of this plasticine in there, it pops out like a dream. at least I was happy with this

Thanks for helping me out on the torque thing,

WD
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top