[Rockrat]

Toy birfs and axles

3 bare front housings $40. pc + sh
1 rear housing $20.+sh
1 birf $45. +sh sale pending
1 inner short $45.+sh sale pending
2 rear shafts $40.pc+sh still have plates on but can be tacken off
1 stock tr $20. pc.+ sh
3rds are open 4:10 Sold
long side and birf Sold
Buyer pays shipping

 

[mrbucket123]

I'm interested in both inners and birfs, are the inners left and right or both the same side? How much would shipping be to 78229 and what kind of payment will you take? Thanks.
-Josh

 

[Rockrat]

p/md you

 

[Rockrat]

Short side axle and birf 12.5 # long side axle and birf 17.5#
so figure 31# with box shipping is $17.50 to 78229

 

[Rockrat]

ttt

 

[shaka 55]

any knuckles for sale?

 

[Rockrat]

Nope knuckles went a while ago
what you see is what you get sorry

 

[poorwheeler]

What year is rear housing? And do your axles match it?(you know I am looking for IFS rear)..

 

[Rockrat]

rear is an 83 so are the axles

 

[Rockrat]

ttt

 

[Free]

Do you have a drivers side disc brake backing plate?

 

[Rockrat]

I will at the end of the wk Im picking up another set and im yankin that stuff off backing plates that is if there in good condition there yours for the price of shipping Ill let ya know when i get em hopefully tomorrow or Wed,

 

[Free]

Thanks alot!! Look foward to hearing from you then.

 

[jeep77cj5]

give ya 90 bucks for both rears shipped to 99353, dont need the backing plate just the shafts and bearings/retainers,,,

 

[Rockrat]

give me a day or so to get the plates off and weighed I think we can do that

 

[jeep77cj5]

I just cut mine off with a torch so I didn't have to remove the bearing and what not, I run disc so did not need them, let me know,,,

 

[Rockrat]

Im going to look at getting them off tonight

 

[Free]

So you are saying that you did get a front axle with discs? Was the drivers side backing plate in desent condition? If so, just let me know how much you need and where to send it, and I'll get a money order out to you. Please PM me if need be.

 

[Rockrat]

were talking about the rear axle backing plates I should be going to get the other axles tonight so Ill let ya know of the condition of the front backing plates