Pirate 4x4 banner

1 - 10 of 10 Posts

·
Registered
Joined
·
2,862 Posts
Discussion Starter #1 (Edited)
toy crawler box with an ott toy to 300 adapter and a dana 300
the 300 is stronger than dual toy cases and can be upgraded.
its also drivers drop

I flipped the 300 myself and made my own twin sticks for it. it shifts smoothly.

its all assembled
ill get pics later this week

asking 600 for everything

call pm or post if interested 925 519 5547
925 631 5419

thanks, Gary


im in pleasanton ca (94566) i will not ship but will deliver within a reasonable dist.
 

·
Registered
Joined
·
1,988 Posts
Which input is the toy box, 21 or 23 spline?
 

·
Registered
Joined
·
839 Posts
also interested in knowning what spline. how hard to swap it to psg drop?
 

·
Registered
Joined
·
2,862 Posts
Discussion Starter #6
you cant make it pass side w/o getting a new 300 the shift forks and housing are now on what was the bottom and the forks are flipped and welded on, just get a new 300 if you want pass drop, they are cheap
 

·
Registered
Joined
·
570 Posts
toy crawler box with an ott toy to 300 adapter and a dana 300
the 300 is stronger than dual toy cases and can be upgraded.
its also drivers drop

I flipped the 300 myself and made my own twin sticks for it. it shifts smoothly.

its all assembled
ill get pics later this week

asking 600 for everything

call pm or post if interested 925 519 5547
925 631 5419

thanks, Gary


im in pleasanton ca (94566) i will not ship but will deliver within a reasonable dist.

If you decide to ship it i would buy the ott set up and the crawl box to use my own dana 300. No need for a drivers drop 300 and shipping would kill on one of them. Give me a ring or pm me if you find yourself in that position i may not check back on this thread. 814-932-7616

thanks,
seth
 

·
Registered
Joined
·
2,862 Posts
Discussion Starter #10
ok i forgot the 300 had the flanges on it, im now asking 300. its in good shape, and has 2 billet flanges from www.inchwormgear.com both are drilled for a couple different toyota patterns, can be drilled for other patterns also. ill get some pics later
 
1 - 10 of 10 Posts
Top