Pirate 4x4 banner
1 - 20 of 74 Posts

·
Registered
Joined
·
115 Posts
Discussion Starter · #3 ·
Just helping a friend out. Kerry is internetless so I'm the only way this stuff will get out.
Keith
 

·
Registered
Joined
·
115 Posts
Discussion Starter · #5 ·
The adapter will be featured in offroad.com on sean whites long wheel base rig on 35. that should be up next month if you don't beleive what your reading
Keith
 

·
Registered
Joined
·
9,106 Posts
Thanks for the news, Keith. You got any pictures you could post? Do you have Kerry's phone number?


Fatkid: you edited his original post to death before much useful info could be passed along. I didn't see it - could you give Keith some guidlines for posting? <IMG SRC="smilies/confused.gif" border="0">
 

·
Registered
Joined
·
86 Posts
Why would you want a toy case on a samurai if petroworks is coming out with a 6:1 GRS III this year? It's not like there is room on a samurai to run a dual marlin setup on a samurai . ..
 

·
Registered
Joined
·
314 Posts
HUh. yeah what poopy said.... <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">.
 

·
Registered
Joined
·
243 Posts
the biggest and best reason aside from the fact that it is way stronger than a sammy case is that if you get toy diffs under there you don't have to worry about that whole offset thingy!! That's why I'm gonna be one of the first to buy these things....then I can get crazy gearing without slowing down my two-wheel drive like in sammy cases!!!!!
 

·
Registered
Joined
·
1,303 Posts
you could just run an offset ifs rear end like me. of course it's not really a hassle when it's already cut down and local. <IMG SRC="smilies/thefinger.gif" border="0"> i could run a toy tcase with this rear end and it would work fine.
 

·
Registered
Joined
·
115 Posts
Discussion Starter · #19 ·
I'm not sure about what guide lines I'm under for posting but. Kerry has made an adapter for both turbo and six cylinder trannys and the 4 banger. Both adapters are mde of billet aluminum and come with all the nessisary hardware to bolt them up to the tracker sidekick bell housing. both adapter were made using CAD programing. He is also has atwin stick set up that work awsome the shifting is so positive. If you want any more info give kerry a call he is a very nice guy and would be more that happy to answer any and all of you question. 607 272 8799
 
1 - 20 of 74 Posts
Top