[yotaprop]

Building an 87 runner got a trail gear spring hanger, I have 3 sets of toyota rear springs and I'm trying to figure out hot to use them because the front eyelet on the springs is a 14mm and my hanger is 18mm is there a trick I'm missing thanks

 

[toyotatime]

http://www.pirate4x4.com/forum/toyota-truck-4runner/265669-rear-up-front-faq.html :flipoff2: replace the bushings in the spring and use the 18mm bolts. I think 79-85 rears used 18mm with no sleeve and 86 on used a smaller bolt with a sleeve. You can get the right bushings from any of the usual toy parts suppliers.