Pirate 4x4 banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,235 Posts
Discussion Starter #1
I need to get some material for some ramps. What are your ramps constructed of? I was thinking 2 inch 3/16 angle in a ladder frame setup. Anyone have some suggestions?\
Chad
 

·
Premium Member
Joined
·
1,289 Posts
I made mine:
5ft x 16 in, rungs 8 inch centers, 2x2x1/4" angle for the rails with 2x2x1/8" rungs

Still pretty light-weight... I use them on my gooseneck... deckover axle trailer.

 

·
Registered
Joined
·
60,133 Posts
thump93yj said:
I made mine:
5ft x 16 in, rungs 8 inch centers, 2x2x1/4" angle for the rails with 2x2x1/8" rungs

Still pretty light-weight... I use them on my gooseneck... deckover axle trailer.

You stole my ramps!

well almost... I think I used 3/16, but I had to weld another 4' length of angle on the back side. Had issues with them bending.
 

·
Premium Member
Joined
·
19,786 Posts
3/16 angle,
Mine loaded some heavy ass trucks too, only bent when it came off on the freeway.
 
1 - 6 of 6 Posts
Top