Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
419 Posts
I used a bolt. I cut the threads off up to the smooth shank part, packed the hole with grease then lightly hammered it in. It has to be a snug fit though or the grease will ooze out.

[ 08-26-2001: Message edited by: Clifton ]
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top