Pirate 4x4 banner
1 - 1 of 1 Posts

·
Registered
Joined
·
17,625 Posts
Discussion Starter · #1 ·
Ok, well.. after a lot of problems, constantly happening with this tranny swap, its sorta almost complete. The dealer gave me the wrong tranny mount, and brackets and stuff that come off the tranny... so.. I have to go back to the dealer to get the tranny mount that I need, then Make the measurements for the driveshaft from high angle. I also need to hook up the shifter cable, dipstick and tube, and mount the floor shifter.. then It SHOULD be done.
Man Im still pissed that we didnt get farther on the tranny swap.
Scott <IMG SRC="smilies/grinpimp.gif" border="0"><><
 
1 - 1 of 1 Posts
Top