Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
454 Posts
Discussion Starter #1
Well, after having the 33's on for about a month, I am now hearing a loud *clunk* sound when I let the clutch out while driving. I am thinking it is the x-case, but not really sure. That just seems like the obvious thing since it didn't do it with the 32's. So, what mounts are you guys running, or recommend? Have any of you experienced similar problems in the past? Thanks for the info. ~Steve

[ 09-17-2001: Message edited by: squirrelman83 ]
 

·
Registered
Joined
·
48 Posts
we went to 1/2 rubber mounts and 3/8 bolts all the way thru. cheap and east just use fender washer above and below and as spacers in the middle. total cost about 10 bucks. mike
 

·
Registered
Joined
·
4,031 Posts
take the mounts off and beef them up befroe you bend them. or you can buy strengthened ones. trust me, its only a matter of time before you bend them.
 

·
Registered
Joined
·
705 Posts
Even the so called "beefed" after market mounts can bend.........
<IMG width= height= SRC="http://www.pirate4x4.com/ubb/uploads/tcasemount.jpg">

I'm only running 31"s, 4.16 t-case and 3.73 r&p. One trip down the 'Con and this is what I got. I'm going to build a t-case mount that goes from frame rail to frame rail.....I will not spend hard earned money on crappy reinenforced t-case mounts again.
<IMG SRC="smilies/pissed.gif" border="0"> I'll post some pics of what I come up with <IMG SRC="smilies/smokin.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
705 Posts
pic didn't come up.........
<IMG width= height= SRC="http://www.pirate4x4.com/ubb/uploads/t-casemount2.jpg">
 
1 - 5 of 5 Posts
Top