[Jkrause]

Took a 89 yj and swapped in a 93 xj4.0 with a 1998 aw4 and a np231

Here my issue and the confusion. The 89 yj used a mechanical speedo housing the np231 used an electronic speedo. I need to convert it back to mechanical

Jeep started like this



And it at this stage now

 

[Jkrause]

 

[pcoplin]

If you get a speed sensor from a (I think) 91 YJ or late 80s Dakota they have both a cable and electric drive.

 

[Jkrause]

The 89 yj was a renix based system. Guessing the actual gage for the speedo driven.

Just lookin for a simple replace the speedo housing and screw in the mechanical sensor. But I'm not really sure on this

 

[Jkrause]

Bump

Looking to figure this out today

 

[knuckle.deep]

theres an APP for that....

 

[geberhard]

IIRC 91 YJ-93 speedo housing should do the trick.