Pirate 4x4 banner
1 - 1 of 1 Posts

53 Posts
Discussion Starter · #1 ·
Im about to extend my frame and wheelbase useing 2 inch tube and f150 rear springs on my 78 cj7. I am planning on getting somewhere between 110 and 115" of wheelbase when done. The thing i cant figuer out what the best way to do it is attaching the tube to the existing frame. I am going to cut the frame at its highest point in the rear(right behind the second set of body mounts behind that crossmember). in front of that there is a foot or so of straight frame before it starts curving back down again. The extension is going to double stacked 2 inch tube hoop coming back from teh frame looping around and then going back to teh frame on the other side. Anyone have any ideas of how to attach this extension to the frame where i am goign to cut it? Pictures would be helpful too if anyone has any.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.