Pirate 4x4 banner
1 - 5 of 5 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter · #1 ·
Where do I get them?

So far everyone I've called seems to think I just need plain u-bolts. They are WRONG! The drive side does not use plain u-bolts, I can tell just by looking at it for two seconds, but I have never seen what I am looking for so I don't know how to describe it.

Does any one have a good picture of the driver side mounting hardware? Or better yet, an extra set they can sell me?
 

·
Registered
Joined
·
2,540 Posts
Try a spring shop most of them can make the custom ubolts. the ford dealer might work too, but I don't know.
 

·
Registered
Joined
·
97 Posts
Here is a picture, you can kind of see the drivers side mounting, but its very similar to the passenger side mount.

<IMG width=640 height=425 SRC="http://www.pirate4x4.com/ubb/uploads/fromrear.jpg">
 

·
Registered
Joined
·
127 Posts
Do you have the piece that fits on the bottom of the u-bolts? This is kinda important its formed to the housing. I just had new U-bolts made (no problem) When I bought 60 I made sure I got that cradle looking thing. Maybe Ford? <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
43 Posts
Discussion Starter · #5 ·
Originally posted by PTO DAVE:
<STRONG>Do you have the piece that fits on the bottom of the u-bolts? This is kinda important its formed to the housing. I just had new U-bolts made (no problem) When I bought 60 I made sure I got that cradle looking thing. Maybe Ford? <IMG SRC="smilies/usa.gif" border="0"></STRONG>
Yeah, I need the part that goes under the driver's side.
 
1 - 5 of 5 Posts
Top