[smokinsilverrt]

so i swapped a 14 bolt in my 97 tahoe.and cannot find the correct size conversion joint. i know the 14 bolt is a 1350. but the driveshaft is bigger than a 1310 and i cant find any parts listings for what i need. this is a tow rig so i dont need to go woth a hd shaft if its not necessary

 

[abig84]

most parts stores like autozone or advance got them or can get them.

when i swaped a 14 bolt into my k5 blazer i had to buy one.... this is the one i got not sure if its the same one you need.

http://www.napaonline.com/MasterPag...ral+Joint+(U-Joint)+-+Combination+-+Universal

if not look around and see if you can find a part number and take it to your local place thats what i did

 

[habitatxskate]

i did the same to my 87 k10 but whwat you are looking for is a 1330-1350
my thread
http://www.pirate4x4.com/forum/showthread.php?t=579041
another thread with same answer.
http://www.pirate4x4.com/forum/showthread.php?t=274344

http://www.napaonline.com/MasterPag...ral+Joint+(U-Joint)+-+Combination+-+Universal

 

[Stuckle]

i got a couple here at home in nnot using


is think the number is pcn-447

thats a presision joint

and no its not a 1330... its a 1344 joint... or pcn 534g

so you need a 1344-1350 joint... pcn-447

your welcome

http://store.summitracing.com/partdetail.asp?autofilter=1&part=PCN-447&N=700+0&autoview=sku

 

[CUPPLES]

1330/1350 joint is Neapco PN 2-3050
S44/1350 joint is Neapco PN 2-1153
or as Stuckle said: 1344-1350 joint... pcn-447 (Precision)

 

[k5krawler]

S44/1350 joint is Neapco PN 2-1153

I just happen to know that will work for a 1988, 1991 K5 blazers and also a 1995 k1500.