Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
Ok so I just finished building my truck, installed the highsteer today and took it for a drive. I am running a stock driveline (87) with chev rear leaves. Stock toyota shackle hooked to a stock chevy shackle.
When I took it for a drive, I get NASTY vibration. Its almost like a rumbling sound. Its so bad then when I jack up the truck, and spin the tire by hand, I can still hear/feel it. It sounds like its coming from the T case but I know it could be anything. Do you think its my driveline angle with the new rear leafs Shoudl I remove the overloads? Whats this CV setup everyone keeps talking about? A stock front driveshaft mixed with the rear?
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #3 · (Edited)
Turns out my 3rd member is toast. Jacked up the truck and let out the clutch in 5th and the rear diff sounds like a can of marbles.
 
1 - 3 of 3 Posts
Top