Pirate 4x4 banner
1 - 2 of 2 Posts

· Registered
Joined
·
234 Posts
reply

Well if you decide otherwise I have 383 stroker block .60 over with all machine work done(fresh block), Laniti 6" H-beam rods, 1.6 roller rockers, Brand new 4x4 Comp Extreme cam ( 3rd biggest they offer )and new lifters, LOTS of head work and all parts in the head are new or like new, Brand new Victor JR intake, What is left to do is, have the crank turned down, buy the pistons of your choice and have it put back together. Thats it. All the parts for this motor have been checked by the machine shop doing the work and is in very good condition. And also have a set of 395/85/20s on Starzworks 40 bolt beadlocks, these are rockwell bolt pattern. Like I said if you decide otherwise, thanks


TTT for ya
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top