Pirate 4x4 banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,076 Posts
Discussion Starter · #1 ·
picked up a waggy 44 out of a 76 cherokee. I believe this is a centered diff but the yolk is actually offset 4 inches to the passenger side. Anybody successfully ran one of these in a cj5. I don't mind moving the engine and t-case over a couple of inches but 4 is crazy. Not to mention the t-case output is alread 1.5 inches to the drivers side. The CJ is SO right now and I am running a CV in the rear. Anyway to make this happen. Don't really want to spend more money.

Anybody know how much it costs to shorten an axle?

arndog
 

·
Registered
Joined
·
97 Posts
depends on how much you can do yourself.. cost me 65 bucks.. which was for moser to cut down my shaft.. and respline it.. for two its something like 85 bucks.. i did all the actual work myself.. couldnt help you with what that part would cost.. <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
1,036 Posts
I Shortened the drivers side 4 inches an it is now the same width as a wide track CJ it isn't very hard to do just take carefull measurments. I would also recomend going with Moser they are really slick. If u need any more info email me.
 
1 - 3 of 3 Posts
Top