Pirate 4x4 banner

1 - 20 of 26 Posts

·
Registered
Joined
·
6,250 Posts
Discussion Starter · #1 ·
Ok here is the spill Ive got a 44 from a cherokee with the 5 one 41/2 bolt patern I will match it to the Wagoneer axle I get with moser custom shafts, Here is my question I am wondering if I need to cut the front down to match the stock width? I cant change the back right now,so its got to stay the same width.It also has to be on the Drivers side, Do they come with manual hubs already? I dont really want to outboard my springs either? So do I have to cut the front down to match the rear?? <IMG SRC="smilies/confused.gif" border="0">
 

·
Registered
Joined
·
4,462 Posts
First of all you can't convert a Waggie front 44 to be 5 on 4.5". The bolt pattern is too close to the center hub. Second, the Waggie 44 is only about an inch wider than the YJ 30 you have. Leave the width alone. No, most don't have lockouts, but they are easy to change to have lockouts. On a YJ outboarding is not necessary. Want details? Do a little research on your own as this subject has been beat to death. I'll second the signature comment. Nobody really cares!

[ 09-05-2001: Message edited by: cmegoup ]
 

·
Registered
Joined
·
6,250 Posts
Discussion Starter · #4 ·
Hey fawkers I realize you cant convert that to 5 on 4-1/2!!! I had a simple question and I did a search last night I just found how to do the swap on a CJ instead of a YJ.. I swear some of you guys on this board are some real ass holes.. But any way thanks for the help Jews!!! <IMG SRC="smilies/pissed.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0">
 

·
Registered
Joined
·
99 Posts
Fawk Sheep's Unlimited - get Thee back to QuadraBlech! <IMG SRC="smilies/puke.gif" border="0">
 

·
Registered
Joined
·
4,036 Posts
Originally posted by Jeepmangled87:
<STRONG>Hey fawkers I realize you cant convert that to 5 on 4-1/2!!! I had a simple question and I did a search last night I just found how to do the swap on a CJ instead of a YJ.. I swear some of you guys on this board are some real ass holes.. But any way thanks for the help Jews!!! <IMG SRC="smilies/pissed.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"></STRONG>
must of done a crappy search this question has been asked a million times, I'm not just saying its been asked alot to make you look bad. as far as us being asses learn to like it or leave cause I aint going no where
<IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
811 Posts
IM not so sure that calling someone a "Jew" is such a putdown?

is it really that bad? IM not jewish, but I dont see why it would be bad to be jewish?

I think you should:

1) figure out how the search function works
2) learn to ask a question
3) grow up
4) go away
 

·
Registered
Joined
·
1,223 Posts
Originally posted by Jeepmangled87:
<STRONG>But any way thanks for the help Jews!!! <IMG SRC="smilies/pissed.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"></STRONG>
WHAT THE FAWK?
 

·
Registered
Joined
·
388 Posts
Uh, I AM jewish, and, while I didn't see any point in giving you a hard time for asking a tech question I DO take offense to your bigoted response. take it elsewhere moron! <IMG SRC="smilies/thefinger.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">
 

·
Banned
Joined
·
506 Posts
first off which one of you smartasses actually took the time to search the topic, all the info comes up about cjs not yjs, so b4 u run your mouths u fawkers need to use the search feture u always spout off about....and the comment about jews was inapropriate but i dont think he meant any disrecpect towards jewish people, just a sayn thats all, just like u calln someone <IMG SRC="smilies/rainbow.gif" border="0">, u dont actually mean hes homesuxuall, and i agree the sig is to long but then again who really gives a fawk about a pink toyota? <IMG SRC="smilies/rainbow.gif" border="0">
 

·
Registered
Joined
·
811 Posts
yeah I did dipshit, search for "yj d44" lots of good info there.

any more questions?
 

·
Registered
Joined
·
4,462 Posts
Originally posted by Jeepmangled87:
<STRONG>Hey fawkers I realize you cant convert that to 5 on 4-1/2!!!</STRONG>
Then why in the hell did you mention anything about matching your Waggie axle to your Cherokee axle (or however you put it)? Your first sentence was so disjointed in your original post that I didn't know what the hell you were talking about. Which is the front axle, the Cherokee or Wagoneer? Are you talking little Cherokee or full size? Don't get bent out of shape when you can't type what you're thinking. Nobody here reads minds.
 

·
Registered
Joined
·
783 Posts
who reay gives a fawk anyways! <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0">
 

·
Registered
Joined
·
6,250 Posts
Discussion Starter · #14 ·
Ah hell I started a fawkin riot oh well!! Ill find the shit out on my own... P.S. BigassYJ I like my sig yours is long to.. <IMG SRC="smilies/pissed.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0">
 

·
Premium Member
Joined
·
4,628 Posts
Dude man, get a grip! If you know enough about asking about outboarding springs, then you should know enough that you can get alot of information by searching, regardless of whether or not it's a CJ. Also, just look around the internet, <IMG SRC="smilies/rolleyes.gif" border="0">, when I did my waggy swap, do you think I just relied on one "source".

Dumbass

Don't let the door hit ya in the ass.

Goodbye.
 

·
Registered
Joined
·
6,265 Posts
skinny said:
first off which one of you smartasses actually took the time to search the topic, all the info comes up about cjs not yjs, so b4 u run your mouths u fawkers need to use the search feture u always spout off about
I personally have spent about the last 2 fawking days reading posts about this, dipshit.:mad: I'm getting ready to do the same thing and within a few minutes with a search you can have more than enough info to get this done.:D
 
1 - 20 of 26 Posts
Top