Pirate 4x4 banner
1 - 14 of 14 Posts

·
Registered
Joined
·
4,456 Posts
No way on the 3.75" OD. It's either 2.75" or 3" if it's Jeep or Chevy. Scout are 2-5/8" (I think) and so are TJ 44s. The wall can be as thin as 1/4" or as thick as 1/2", depends on what it came from.
 

·
Registered
Joined
·
4,720 Posts
NE-RokToy said:
Most fronts are 3/8's, HD's are 1/2"
unless it is a 78/79 RC44 then it will be 2.875odX.250wall
 

·
Registered
Joined
·
737 Posts
All the front high pinion ford units I have seen, except the ones that have cast in C-bushing mounts (mid 77 to 79) have all been 1/2" thick, including the 1972 unit that is under my rig.

Andy
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top