Pirate 4x4 banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
803 Posts
Discussion Starter #1
Trying to help out a friend fix his winch. Would ultimately like to see a picture of someones wire connections, inside the box (solenoids) and out. The motor is good, just cant seem to figure out the correct wiring. He had to replace them, and now getting it to work is harder than expected. Thanks, Chad
 

·
Premium Member
Joined
·
3,149 Posts
Here ya go:

<IMG width=576 height=446 SRC="http://www.pirate4x4.com/ubb/uploads/Warn12kBox.jpg">

I labled the leads that go to the motor. The motor should be stamped by each lug. Let me know if you need more detail.
 

·
Registered
Joined
·
289 Posts
Thanks TPI Jeep. That might help, but that looks like a newer winch, mine appears to be an older version. The solenoids look a little different. On mine, the leads that go to the motor are on the sides of the solenoids, instead of the top. Does anyone have a pic of an older one?
 
1 - 3 of 3 Posts
Top