Pirate 4x4 banner
1 - 8 of 8 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
Are there any companies that sell the weld on "ears"(radius arm "tabs") for a D44? The ones like the EBs and F150s have. I heard that someone makes them but I have not been able to find anything on them!! I want to use full width axles under my ranger and I have a D44HD front and a D60 rear sitting in my garage. They are both leaf springs and want to change the front (maybe the rear also) to coils and a radius arm setup.

Any info would be a big help!!
 

·
Registered
Joined
·
1,286 Posts
Check with currie they make bolt in axels for eb's so they should have the pieces you need. <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #3 ·
Originally posted by rokcrln:
<STRONG>Check with currie they make bolt in axels for eb's so they should have the pieces you need. <IMG SRC="smilies/usa.gif" border="0"> <IMG SRC="smilies/beer.gif" border="0"> <IMG SRC="smilies/usa.gif" border="0"></STRONG>
I am not putting them into a EB! Why would I want to pay currie big $$ for an axle when I already have a D44 and a D60?!?! <IMG SRC="smilies/confused.gif" border="0"> I am just looking for the radius arm mounts that are on the EB and F150 D44 so I can weld them on to this axle.
 

·
Premium Member
Joined
·
19,779 Posts
Originally posted by Gordon:
<STRONG>believe it or not James duff is making and selling them. Not in the catalogue but hey have them.</STRONG>
I have heard that rumor as well call Duff and see if they have em yet
Phone: 1-360-683-2160
8am-5pm M-F West Coast
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #7 ·
Originally posted by welndmn:
<STRONG>I have heard that rumor as well call Duff and see if they have em yet
Phone: 1-360-683-2160
8am-5pm M-F West Coast</STRONG>
Thanks for the # to Duff. I called and they said they are making them and they are under cat. # 5340 and they are $75.00 for a set of 4 (covers one axle both left and right radius arms). They said there are no install instructions but who cares!!! Can set in any castor you want!! <IMG SRC="smilies/biggrin.gif" border="0"> Hope this info is useful!!

Thanks for your all your help guys!!

Originally posted by BroncoRob:
<STRONG>Come on guy read what he said
"they will probably have the pieces you need" <IMG SRC="smilies/rolleyes.gif" border="0"></STRONG>
Take it easy man!!! I just misunderstood what he meant!!
 
1 - 8 of 8 Posts
Top