Pirate 4x4 banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4,591 Posts
Good Question... I was looking to do this to my Auto tranny.

http://www.4x4wire.com/tech/dana300/
I used 5/16" tube and fittings ordered from McMaster. The tube is Nylon 6 clear tubing. Nylon 6 is pretty stiff tubing, but it is clear and is oil and chemical safe as well.
 

·
Registered
Joined
·
12,251 Posts
I've got 3/8" clear coolant line from the auto parts store on my duals and the back of my 205.
 

·
Registered
Joined
·
905 Posts
Im using clear nylon tubing with push-to-connect fittings, same as the link above. My build thread has pics <see signature>
 

·
Registered
Joined
·
1,215 Posts
McMastercarr has a bunch of different materials that are good for these applications. There are a few write ups here with part numbers. Bggrnchevy has one of them.
 
1 - 6 of 6 Posts
Top