Pirate 4x4 banner

1 - 7 of 7 Posts

·
Registered
Joined
·
454 Posts
Discussion Starter #1
I realize that Wagoneer's and Scout's both work, but what else? Also, what is the bolt pattern on both? I need to stay with the 5x5.5 due to my wheels. Finally, what year Wagoneer's work? I'm running 33's right now, but am itching to get it set up to house some 35x12.50's. <IMG SRC="smilies/biggrin.gif" border="0"> Thanks. ~Steve
 

·
Registered
Joined
·
48 Posts
I run wagoneer 44s under my zuk-want to buy it <IMG SRC="smilies/smile.gif" border="0">-..They came from 78-79 Chief with Quadra-Trac. In order to keep the 5x5.5 bolt patter I went to CJ front brakes (spindles..everthing), and ran scout outer shafts. As for the rear, I converted using the warn full floater kit. You could have the axles re-drilled, I know moser does this. I would stay away from a scout front end, as the caster is so wacky on them. With the wagonner front end, you will have to find a way to widen the frame on the front, but it is not a big deal. You will have a slight issue with compound driveline angles, but again, it isn't that big of a deal. If you have any questions just ask...
 

·
Registered
Joined
·
384 Posts
Scouts are 5 on 5 1/2 just like you Sami's, if you need some scout 2 axles let me know, i have a few and am close to you in Penrose 38 miles south of Colorado Springs
 

·
Registered
Joined
·
221 Posts
Whats up? I am in Canon City =). Have you ran Indy yet? I am currently tearing down my zuk to put saginaw p/s on it but I have my dads zuk to wheel <IMG SRC="smilies/smile.gif" border="0">). I am 19 and my buddy is 21. We are currently putting wagoneer dana 44's on his and working on building a kit as well. let me know if you want to get together and bs zuks.

Chris M
[email protected]
719-275-7696 Canon
719-542-5821 Pueblo
 

·
Registered
Joined
·
221 Posts
oops forgot to updated my profile
 

·
Registered
Joined
·
454 Posts
Discussion Starter #6
Great to hear of a couple of local zuks. We'll have to hit the trails sometime. Right now I need to buy, or have a custom t-case mount built. After I put on the 33's, it now clunks when I shift. I think it is just weak.
Anyways, I'd we really interested in taking a look at your zuk sometime. Sounds like just what I want to do.
Email me sometime so we can get together. Sounds like you could do some work for me. <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> [email protected]
Oh yeah, and you'll have to show me the ropes at Indy. <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
221 Posts
I send you a PM.. =)).
 
1 - 7 of 7 Posts
Top