Pirate 4x4 banner
1 - 13 of 13 Posts

·
Registered
Joined
·
168 Posts
It's a 3/4 elliptic setup. rather than the rear shackle attaching to the frame, it attaches to the end of 1/2 of another leaf, the other end of the 1/2 leaf attaches to the frame. This allows the axle to droop more during flex. Accomplishes the same basic thing as a revolver shackle or dual shackle setup.
 

·
Registered
Joined
·
4,574 Posts

Rather than haveing your shackle go to a fixed hanger mounted to the frame you have the shackle mounted to a piece of old leaf spring so it can pull away from the frame when all twisted up like this.

 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top