Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
281 Posts
Discussion Starter · #1 ·
What's the best year ro years to use for the reduction box when setting up dual cases?

Does it matter.. or will any do as long as its a top shifting box. I will be using 21 spline shafts and a AA adapter. I have a t/case out of a 87efi for my main case.
I just don't want to waste my $$ on something I can't use..

Thanx tom
 

·
Registered
Joined
·
3,032 Posts
The rear case HAS to be a top shifting box( EFI box). The front half case has to be compatible with whatever transmission you have. So if you have a G-52, the front case has to have the shift forks sticking out of it. But if you have A W-56, then the front case has to have the internal shift forks.
 

·
Registered
Joined
·
5,103 Posts
Blackntan is right except for the efi part.You can use a carb case for the rear as long as it's from a 79-83. They had the t-case shifter in the case not the tranny like the 84 - up carb cases.
<IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
5,810 Posts
Any 4 cylinder case will work. It does have to be top shift, which can be converted from a front shift. Marlin converted mine for $75.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top