Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Help. Have to replace the front drivers side wheel bearing. Dana 60 in the front. Got everything with the hub and the two hub nuts removed. I can see the bearing (what's left). What the hell do I have to do to get the rotor and everything to come off. From what I can tell there is nothing left holding it on. The advise and suggestions are appreicated!

<IMG SRC="smilies/eyemouth.gif" border="0">

[ 09-15-2001: Message edited by: WJ_ZJ_TJ ]
 

·
IH/Rover Moderator
Joined
·
20,917 Posts
If you have an empty wheel just put it on with two or three lug nuts and pull like hell.. <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
188 Posts
<IMG SRC="smilies/rolleyes.gif" border="0">
 

·
Registered
Joined
·
1,040 Posts
A BFH always works <IMG SRC="smilies/wink.gif" border="0">
 

·
Registered
Joined
·
1,426 Posts
IF you can see damage to the bearing, its possible the inner race has spun and friction welded itself to the spindle.
 
1 - 5 of 5 Posts
Top