Pirate 4x4 banner
1 - 5 of 5 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
what's the best source for front wheel and knuckle bearings? I called Toyota--- too much money. NAPA is cheaper but I want to know who's bearings they sell (I'll call them today) anybody else Ii should call? I'm just north of seattle
 

·
Registered
Joined
·
2,833 Posts
I have had good luck with pepboys. they are cheap, and every one I have order turned out to be a koyo bearing, same as oem toyota.

-Brett
 

·
Registered
Joined
·
4,312 Posts
I have found the CR(Chicago Rawhide) bearings are the same as OEM, they are Koyo's and about 1/3+ the price. I haven't found knuckle bearings for much less than Toyota price of $20 each bearing and race. Well maybe a bit less but they were TRW's I think, I went with OEM Koyos from the dealer instead

I get my brake and bearing at South Side Brake and Clutch in Tacoma but I think they have shops up your way(Seattle right?)

Every CR bearing I have used came in a CR box but a baged Koyo(OEM) was inside :)

John H
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top