[RustyNailJustin]

You might think this is a stupid question but its inpossable to find and driving me crazy! Who makes a 1 3/8" thin wall 1/2" drive socket? Every time you try and go past 1 1/4 it goes to 3/4 drive and that to thick to get into the yoke where the nut is. I tried sears and they said no have,Napa nope, whats the closest MM I think 34MM maby?

 

[Mo]

Matco Tools pn C446A

 

[EBSTEVE]

I had to buy a Sears 3/4 drive and use a reducer to get it to 1/2 and grind the socket to get it thin. Big PITA but it works, I hope I never lose it.

 

[Supergper]

there isn;t an exact metric but its closest to a 35mm...its like 34.9mm or there about

 

[RustyNailJustin]

I had to buy a Sears 3/4 drive and use a reducer to get it to 1/2 and grind the socket to get it thin. Big PITA but it works, I hope I never lose it.

Yea all my big sockets are 3/4 inch drive but I really dont like grinding them down. But I will if I have to.

I will try Matco first thanks MO.

 

[Tumbleweed]

I used a 1-3/16" 12 point on my Toy. yoke.