Pirate 4x4 banner
1 - 2 of 2 Posts

3,939 Posts
Keith said:

So Brian, how long is your long side. Sounds like you have the same setup as mine.

I forget how long it is- roughly 30 or 31. If I had oem wheel hubs on my axle it would be 61" wms to wms. I made custom hubs for mine to move the wms out 1/2" per side to facilitate easier brake caliper brackets.

Originally posted by Lil'John

My intended width is going to be 60-61(maybe 62 at the worst case)
The 15.96" shaft will then get you the most offset pinion.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.