Pirate 4x4 banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,082 Posts
Discussion Starter · #1 ·
I just installed a guage cluster (out of a '88 22RE SR5) into my '85 22R. I have three new wires that are in the new wiring harness. One wire is purple with red stripes, one wire is black with red stripes, and the other wire is yellow with red stripes and a blue line (picture below).

Anybody know which one of these three wires goes to my tach plug-in down by the coil?

 

·
Registered
Joined
·
4,995 Posts
i am not sure what you are asking,i know when i hooked up my 86 harness to my 79 dash, the black wire was the tach lead.
 

·
Premium Member
Joined
·
7,366 Posts
Originally posted by gnob:
<STRONG>i am not sure what you are asking,i know when i hooked up my 86 harness to my 79 dash, the black wire was the tach lead.</STRONG>
According to a schematic, gnob nailed it, black is correct all the way from the igniter to the tach. Ohm it out if you want to be sure.
 

·
Registered
Joined
·
3,501 Posts
It is the black one. But you may have to move it in the plug so it hits the right contact.
 
1 - 4 of 4 Posts
Top