[Slayer84]

I have a street truck with a Chevy 60 front and a psc hydraulic ram assist. I have high steer arms also. I would like to find a single ended psc ram mount. It gas to work with leaf springs.Who makes one.

 

[j20brett]

79 Ford 60 but same concept.

 

[Georgia boy '88]

79 Ford 60 but same concept.

Mine is similar for an 03 Ford 60.

My mount on the diff side will end up changed though, I'm having issues with the diff cover sealing, after a weekend of hard riding.

 

[munepit]

I use this with a DIY4x diff cover.

Dana 60 RAZORBACK ram assist option

 

[MNorby]

Just a couple tabs on the axle and tierod here:

Here is a mount I made for full hydro high steer but would be similar for assist too. Works kinda like this one: High steer hydro assist mount

 

[bgredjeep]

Here's what I did for my new axle. Used a Barnes 4wd trackbar mount for the ram mount. It would work w/ high steer as well (ram under the tie-rod of course).

 

[scramblerj]

I have a bracket welded on the leaf spring plate that my single ended ram attaches to, and I run a high steer arm. No pics right now on hand.

 

[heatstroke]

Here's mine. Ram mount and tabs were bought from Ruff Stuff.