Pirate 4x4 banner

1 - 3 of 3 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter #1
how did you deal with the drivelines ? i'm using dubble cv in rear . and the pinion is pointed up but the driveline angel is still sharp . and the vibration is real bad when taking off and slowing down . can you drop the t case ? i called rro and they dont know jack. all he said s thay you can't drop the tc . please help thanks
 

·
Registered
Joined
·
86 Posts
I am running that exact set-up. I used an 83' Toyota truck for my doner vehicle. I threw the axles under my Zuk and then was given the advice to use the front driveshaft from the Toyota as a REAR driveshaft for my Zuk. I have been running this set-up for a year now with 37" BFG Krawlers and 8:1 T-case and believe it or the stock front Toyota driveshaft has held up with no problems!!

I did have to do a custom driveshaft for the front though. If you need pics let me know.
 
1 - 3 of 3 Posts
Top