Pirate 4x4 banner

1 - 20 of 37 Posts

·
Registered
Joined
·
986 Posts
Discussion Starter #1
Dynatrack? Currie? Redline?

Buy a Currie housing and build out from there?

Anybody build them for cheap?

I would DIY, but I can't find a D60 front for very cheap, local shops want arm+leg to cut and weld, and I don't have access to a shop anymore, so I have to farm out the work.

Reccomendations?

-J

-J
 

·
Registered
Joined
·
914 Posts
dynatrac builds really nice stuff but their customer service sucks balls ...
and yes i have their axles under my rig .
dont expect them to ship on time ...
as far as currie i cant tell you much
as far as redline do a search here to find out about them
 

·
Super Moderator
'82 Scrambler, '14 Rzr
Joined
·
62,007 Posts
Impossible to answer this... You say "cheap" but mention DIY is out of the question and you ask of Redline, Dynatrck, or Currie can do it?

You need to figure out of you want cheap or $$$$...
 

·
Registered
Joined
·
1,042 Posts
Call Boyce. They do great work and they will charge you a fair price. Dynatrac takes like two months or more to get you a 60. And they are the most expensive ones out there.
 

·
Registered
Joined
·
986 Posts
Discussion Starter #6
Who is Parts Mike?

I was just looking at Boyce, has anybody used them? Opinion?

I'd LIKE to get one cheap, but I can't weld anything the way I am set up right now, which means farming out the work, which means $$$. I don't really mind spending some $$, but $5K is a ton of cash for me. $3K is attainable.

Opinions?
 

·
Registered
Joined
·
195 Posts
No personal experience with Boyce (yet <IMG SRC="smilies/wink.gif" border="0">) but they will hook you up. Not bad on the prices either. Right around $3k for a reverse rotation 60 front with a spool and choice of gears. Probably will run less if you dont have to go RR though.
 

·
Registered
Joined
·
986 Posts
Discussion Starter #8
Definately going RR, and probably ARB. My total was something like $3500 from boyce, but that's not cut down, estimates. Lower than the base price at dynatrack--$4K

Other opinions?

-J
 

·
IH/Rover Moderator
Joined
·
20,917 Posts
Originally posted by xBabyJesus:
<STRONG>Who is Parts Mike?

I was just looking at Boyce, has anybody used them? Opinion?

I'd LIKE to get one cheap, but I can't weld anything the way I am set up right now, which means farming out the work, which means $$$. I don't really mind spending some $$, but $5K is a ton of cash for me. $3K is attainable.

Opinions?</STRONG>
I got a great deal on my custom d-60 from him. http://www.partsmike.com/
 

·
Moderating Midget
Joined
·
27,537 Posts
Call Sunray Engineering, I just had a RC D60 built for the rear and a 609 Hybrid in the front (I highly recommend this)

817 594 9201 They were around $1500 less than Dynatrac after all was said and done.
 

·
Registered
Joined
·
1,043 Posts
Originally posted by Lance:
<STRONG>So how much?</STRONG>
Yeah I wanna no too???????????

What do you Consider Good Deal??????


I want Reciept's


Adam,,,
 

·
IH/Rover Moderator
Joined
·
20,917 Posts
Originally posted by Lance:
<STRONG>So how much?</STRONG>
My 60 was a 60" rear(1.5",35spline, SF, disc and a ARB) He was doing a few front 60's and I even helped load one on to a Yellow Frieght Lines truck for him. Call him and ask him or Brett how much.
 

·
Registered
Joined
·
1,043 Posts
Originally posted by Old Scout:
<STRONG> Call him and ask him or Brett how much.</STRONG>
<IMG SRC="smilies/rainbow.gif" border="0">
 

·
IH/Rover Moderator
Joined
·
20,917 Posts
Originally posted by Adam Ant:
<STRONG> <IMG SRC="smilies/rainbow.gif" border="0"></STRONG>
WTF is your problem? xBabyJesus wanted to know were to go. I had a good expenence with PM and he was by far cheaper than anybody else mentioned. The axle was done right and on time, thats better than some of the other venders brought up here. so just what is gay about that? <IMG SRC="smilies/pissed.gif" border="0"> <IMG SRC="smilies/pissed.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0"> <IMG SRC="smilies/flipoff.gif" border="0">

[ 09-25-2001: Message edited by: Old Scout ]
 

·
Registered
Joined
·
1,043 Posts
Becuase No One Steps Up to the Plate when People Ask How Much???????????
Like It's A secret!!!!
Come awnn

I can Tell You Part for Part What I put in My REV 60'sAnd where I got them!!!


Besides Rear's Are way More Cheaper Than Front's

Adam,,,
 

·
IH/Rover Moderator
Joined
·
20,917 Posts
Originally posted by Adam Ant:
<STRONG>Becuase No One Steps Up to the Plate when People Ask How Much???????????
Like It's A secret!!!!
Come awnn

I can Tell You Part for Part What I put in My REV 60'sAnd where I got them!!!


Yea no shit rears are cheaper

Besides Rear's Are way More Cheaper Than Front's

Adam,,,</STRONG>
Yea no shit rears are cheaper
<IMG SRC="smilies/rolleyes.gif" border="0"> <IMG SRC="smilies/rolleyes.gif" border="0">

The 60" SF with Dutchman 1.5" 35 spline axles and all new 11" disc brakes, set 20 bearings ends, ARB, ready to go cost me 1600.00. But we are talking about front 60's and I didn't think you would give a shit about what a rear cost. BTW DANATRASH wanted over 4500 for the same axle.

[ 09-25-2001: Message edited by: Old Scout ]
 

·
Registered
Joined
·
1,043 Posts
Originally posted by Adam Ant:
<STRONG> <IMG SRC="smilies/rainbow.gif" border="0"></STRONG>
You Where Evasive And Not to The Point !!!
I deal With Mike Almost Every Day I will See Him Today As Matter Fact to pic Up Some Parts for A project!!! And If He Is Cutting people Good Deal's I wanna Hear About It !!!!

My Opinion It Was A gay Comment!!! And I think Alot of people Will Agree

you eluded the point Of the ??? that was Asked!!! And I am Asking Again !!!

How Much????????????/
 

·
IH/Rover Moderator
Joined
·
20,917 Posts
Originally posted by Adam Ant:
<STRONG>You Where Evasive And Not to The Point !!!
I deal With Mike Almost Every Day I will See Him Today As Matter Fact to pic Up Some Parts for A project!!! And If He Is Cutting people Good Deal's I wanna Hear About It !!!!

My Opinion It Was A gay Comment!!! And I think Alot of people Will Agree

you eluded the point Of the ??? that was Asked!!! And I am Asking Again !!!

How Much????????????/</STRONG>
I guess you need glasses!
<IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0">

I guess I need to ask Rich who you are? To bad his puter is down.
 

·
Registered
Joined
·
1,043 Posts
mike Still has To Go through DynaTrac To get C's And Outer's For 60's unless you Bring them to the Table !! for the Project


Do you have A REV 60 Front ???????
 
1 - 20 of 37 Posts
Top