Pirate 4x4 banner

1 - 4 of 4 Posts

·
Registered
Joined
·
478 Posts
Discussion Starter #1
Can someone tell me why I cant use the yj setup? I know there coming out with the xj version someday.. but it looks to me , there aint anything in the way.. except for the sway bar mount(plasma cutter).. so anyhoo? look at the pics? where's the snag? Cant be width? and they're both dana 30's. So whats the deal guys?

Below is a pic of a YJ..



Below is a pic of a xj...(supposed prototype xj)
[img]http://www.mountainoffroad.com/catalog/St%20Corr%20Kit/SCK-XJ-01.jpg

NOT MUCH DIFFERENCE , if any.
 

·
Registered
Joined
·
1,406 Posts
I would say it could be width or a clearance issue with the coil mounts. As far as the sway bar mount ,I agree , just unbolt the darn thing and cut off the mount on the axle. I would call them or e-mail them about it. Looks pritty nice I wouldent mind having one.
 

·
Registered
Joined
·
1,406 Posts
Looks nice except it uses the stock tierod mounts on the spindle. With the tierod ends and everything else being so much stronger you could snap the spindle.this is why I like the MORE bracket on the passangers side spindle. I think it would be easier to get off the trail and replace this bracket than it would be with a snaped spindle. IMOHO.
 
1 - 4 of 4 Posts
Top