Pirate 4x4 banner
1 - 6 of 6 Posts

·
Registered
Joined
·
695 Posts
Discussion Starter · #1 ·
Just installed some chevys in the rear of my yota, they work pretty well. Anyway at full tuck, my 36x12.5x15 actually rub my rear bumpstop on the frame! And I just bought these rims and tyres! My ???---Should I invest in a newer rear axle--86-94? That is 3 inches wider. or should i get some more rims with a wider ofset?? I have an 84 now. Help need this fixed by the clean up. Like to go without any problems.. thanks --
 

·
Registered
Joined
·
4,036 Posts
get a late model rear end, it will cost about the same as cheap wheels and less then expensive ones. Also this gives you the option to go even wider in the future, and gives you bigger brakes
 

·
Does yer dewg bite?
Joined
·
5,666 Posts
Don't forget you'll have to run spacers in the front if you want to be 3" wider to match.
I'd still go with a new rear and spacers <IMG SRC="smilies/biggrin.gif" border="0">

<IMG SRC="smilies/fj.gif" border="0"> <IMG SRC="smilies/fj.gif" border="0">
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top