Pirate 4x4 banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,010 Posts
Discussion Starter #1
when i get tires. i'm trying to either find some old chevy wheels that are 6 lug. since they toyota wheels are 6 lug on 5.5 centers.
i talked to a guy who said he would trade his 10 in wide wheels for my toyota 6 in wides. he has a blazer that he is working on and wants some different wheels later. are the 10 in going to be too large.

i'm gonna get some 33x11.5x15 wheels. i'll try a search on back spacing, but if you want to answer that question too. thanks <IMG SRC="smilies/biggrin.gif" border="0">
 

·
Registered
Joined
·
1,988 Posts
The center hole is too small on stock Chevy's. After market wheels mostly have the large center and will fit either.
 

·
Registered
Joined
·
481 Posts
on my dad's k5 blazer the stock rims didn't work since the chevy center hole is smaller(toy is bigger).

unless they are after market rims, then no. the steel wheels that the blazer has now work since the center hole is bigger.

hope this helps.

happy trails
rich *ruger* <IMG SRC="smilies/usa.gif" border="0">
 

·
Registered
Joined
·
34,267 Posts
If you want to use them and the holes to small, have them turned on a big lath, I did once, only need 1/8"th all the way around to make it 1/4" <IMG SRC="smilies/smile.gif" border="0">I wouldn't run 10"s on a 11.50 or 12.50, they fall off easier when aired down <IMG SRC="smilies/frown.gif" border="0"> run 8"s
 

·
Registered
Joined
·
3,010 Posts
Discussion Starter #5
i've been reading some old stuff about it.

i'm pretty sure i want the 15x8 with about 3 inches of back spacing. i like to air down to around 15 psi on the rock. i only go to 20 psi with my 29 inch tires rich now so i don't blow a bead. my clearance sure sucks!

i guess i'll start hitting the junk yards around here and see what they have. <IMG SRC="smilies/biggrin.gif" border="0">

thanks for the help! <IMG SRC="smilies/usa.gif" border="0">
 
1 - 5 of 5 Posts
Top