[Tankota]

The project is to put a 67 third member in a 76 front end (i.e. disks).

The 76 frontend didn't come with a third member.
The 67 frontend has a third member with coarse spline side gears and I have spare fine spline side gears.

Will these fine spline side gears fit just fine (no pun intended <IMG SRC="smilies/biggrin.gif" border="0"> ) in place of the coarse spline side gears?


Yah, probably will have to drill out the bolt holes in the third....no biggy.

 

[dog walker]

Yes they will, but you will have to bust out the drill and attach a 3/8" drill bit and drill out the 10 third member mounting holes to fit onto the 76 housing.

Jeff

 

[Tankota]

Tanks jeff <IMG SRC="smilies/smile.gif" border="0">

 

[dog walker]

Your welcome. <IMG SRC="smilies/smile.gif" border="0">